H07Z1-K Cca

Use and installation method

Reference Guide EN 50565
Suitable for environments containing a large number of people, when special fire performances are necessary or where local conditions or regulations require increased levels of public safety, a low level of smoke emission, toxic and corrosive gases. Suitable for fixed protected installations in lighting and control gear for voltages up to 1000 V a.c. or up to 750 V d.c. to earth.
For installations in surface-mounted or embedded conduits or similar closed systems. It can be installed in bunches. The presence of water in contact with cable is not acceptable.

Reference Construction Products Regulation 305/2011 EU and Standard EN 50575:
Given its properties of limiting the development of fire and heat emission, the cable is suitable for the supply of electricity in buildings and other civil engineering works.

Special features

Good sliding properties in pipes, good abrasion resistance, easy stripping.

Installation conditions

• Minimum installation temperature: 5°C
• Recommended minimum bending radius: 4 times the cable diameter
• Recommended maximum tensile stress: 50 N/mm² of the cross-section of the copper

Construction

• Conductor: class 5, flexible, plain copper wire
• Insulation: LS0H termoplastic, TI7 quality
• Colour: black, blue, brown, orange, grey, red, light blue, violet, white, green/yellow.
  LS0H = Low Smoke Zero Halogen