U-1000 R2V - 5G16

Use and installation method

For use on industrial sites. Particularly suited in cases of high operating temperatures and when high resistance to UV radiation and atmospheric agents is required. Good resistance to low temperatures and chemical agents. Can be used without additional mechanical protection in the open air, fixed to walls or in channels, inside gangways or in empty spaces in constructions in general. Can be laid underground with mechanical protection constructed from slabs, tiles, or bricks. It is not recommend to lay this cable in ground flooded for more than two months per year. With appropriate mechanical protection, it can be used in areas subject to the risk of explosion, but in this case the permitted current load is reduced by 15%.

Reference Construction Products Regulation 305/2011 EU and Standard EN 50575:
The cable is suitable for the supply of electricity in buildings and other civil engineering works.

Special features
Excellent resistance to UV rays (class AN3 according to NF C 15-100).

Installation conditions

• Minimum installation temperature: -10°C
• Recommended minimum bending radius: 6 times the cable diameter
• Recommended maximum tensile stress: 50 N/mm² of the cross-section of the copper

Marking

• Conductor:
  • Class 1, solid, plain copper (cross-section ≤ 4mm²)
  • Class 2, stranded wire, plain copper (cross-section ≥ 6mm²)
• Insulation: XLPE (cross-linked polyethylene)
• Filler: thermoplastic
• Sheath: PVC
• Colour: black